1. Automatic Surface-cum-Edge Grinding Machine
 
 
 
 
 Special Features :
 

  1. Machine Bed:
    Welded, modular construction Principle.
    Smooth inner area for good cooling water drainage and easy cleaning.

  2. Guideways:
    Hardened and ground steel bands for main and side guides, easily exchangeable.

  3. Machine Table:
    Fixed for flat grinding with total table coverage, in Electro-Magnetic design or as cast iron table with 'T' slots & clamps.
    Electro-Magnetic swiveling table for flat, bevel and multi surface grinding, in one setting up operation, swiveling 360 degree, multiple bearing points with large diameter journals for maximum rigidity. Additional clamping sides with 'T' slots and clamps.
    Swiveling table in casts iron for mechanical clamping. 
    Mechanically table locking, by hand.

     
       

    Automatic Surface-cum-Edge Grinding Machine (with Electro Magnet Chuck)  for various industries

  4. Grinding Head Carriage:
    Heavy casting mounting on four reels with eight New-Departure dust proof ball bearings which act as rollers. Foru reels guides the carriage in the carriage ways of the bed. The sliding base, mounted on the top of the carriage, is adjustable the feed the grinding segmental or cup-wheel to the knife. The motor base can be swivelled 10 to 25 degrees, so that knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.

  5. Down-Feed for Grinding Tool:
    Multiple spindle system for play and weight equalization.

  6. Grinding Motor:
    SIEMENS or NGEF Brand.

  7. Grinding head:
    Cylindrical type bonded to flange for light grinders, segmental heads for heavy grinding machines.
    For quick re-setting or changing of segments, an easily accessible changing station is situated at the rear of the machine.
    To ensure vibration free running, all grinding wheel flanges and segmental heads are fitted with adjustable balancing weights. For obtaining maximum segment use, patented segment savers 
    can be used. 

  8. Cooling System:
    Water tank attached with the machine. Cooling fluid application by the electro-coolant pump.

  9. Electrical Unit:
    All electrical controls are housed in the master panel board.

  10. THE "POLY MASTER" AUTOMATIC SURFACE CUM EDGE GRINDING MACHINES ARE SUITABLE FOR:
    MACHINE TOOLS INDUSTRY,
    AUTOMOBILE, TEXTILE MACHINERY PARTS,
    INDUSTRIAL KNIVES/BLADES MANUFACTURERS,
    SURFACE CUM EDGE GRINDING FOR ALL INDIAN AND IMPORTED CUTTING MACHINES KNIVES
    POLAR
    SEYPA
    WHOLENBERG
    MAXIMA
    REKORD
    HYCUT
    PROTECK
    SUDARSHAN

    PAPER & BOARD MILLS and other engineering Industries Etc.

  11. NOTE:
    Due to constant improvement, Manufacturers reserve the right to make alterations in specifications and designs.