Control Panel:
The machine is provided with a control system for the whole Electric System. It operates the Electric Motor, Lubrication system, machine lamp and Key switch for shut down the machine in non working condition, special provision of shut off switch is provided for instant stop of the machine.

Machine Lamp:
This system has been provided to ease the thread piercing to eliminate all parts/function for every operation of the machine.

Adjustable Hook/Needle Holder:
This device is provided to facilitate the adjustment of stitches. Maximum 7 stitches can be out and these can be had at the desired point with help of said adjustable Hook/Needle holder. With this the distance and the no. of stitches can also be adjusted.

Electro Magnetic Clutch Brake:
This system is provided for the purpose to conduct smooth functioning of the machine and in the event of any emergency, the magnetic Brake is applied for the instant shut off the machine. This special feature of the machine deviates from all the conventional machine in terms of the better control on the machine by the operator. The machine can be put into operation only when the operator desires and demagnetize the clutch brake. This feature is most helpful in adverse conditions to avoid futile running of the machine.

Lubrications:
The machine is equipped with time schedule based lubrication for repeated lubrication at desired time intervals to lubricate all the rotating parts for lessening the wear and tear.